Eurobud EPS 40

Eurobud EPS 40

The expanded polystyrene plates Eurobud EPS 40 are made exclusively from import raw materials on the modern European equipment.

The Eurobud factory produces modern polystyrene foam according to European quality standards. Our manufactured polystyrene foam boards are certified and fully comply with the current standards of DSTU B EN 13163

Standard sizes of expanded polystyrene plates: length 100 cm, width 50 cm, thickness from 1 cm to 10 cm, with a step of 1 cm.

When ordering plates with a thickness of 11 cm to 60 cm, the number of packages must be a multiple of 8.

Under the individual order it is possible to make plates 100 cm, 200 cm and 400 cm long, 100 cm or 120 cm wide, and the volume of the whole order should be a multiple of 4.8 m3.

The side edge of EPS can be made flat and milled (allows you to lay the plates on the technology of “spike-groove”).

The density of Eurobud EPS 40 is 10 kg/m³*

*+- 5% depending on storage conditions.

Benefits
Benefits
Parameters
Features
Application
Gallery
Certificates
Guarantees
Documentation
icon adv
Effective use 50 years

Eurobud is the only one manufacturer of expanded polystyrene in Ukraine, which has confirmed the term of effective operation of polyfoam without loss of primary properties more than 50 years

icon adv
Environmentally friendly and safe

Eurobud products are confirmed by the Ukrainian eco-label "Green Crane"

icon adv
Flammability group G1

Self-extinguishing. Does not burn, does not spread flames

icon adv
Foreign raw materials

All Eurobud products are made exclusively from high-quality imported raw materials

icon adv
Innovative equipment

We work only with new modern European equipment

icon adv
Own car fleet

We provide our own specialized transport for the delivery of wholesale orders

popular questions
Which EPS is the best to choose for insulation?
For correct and effective insulation, it is necessary to choose foam of the appropriate brand and thickness, according to the loads and the project. For high-quality thermal insulation of facades, we recommend using foam plastic with a density of 12.5-18 kg/m³ (EPS 60 - EPS 100), a thickness of 15-25 cm. For thermal insulation of floors on the ground, foundations, plinths, flat and pitched roofs, you should choose foam plastic with a density of 15- 35 kg/m³ (EPS 80 – EPS 250), 15-35 cm thick. You can read more about the recommendations for the use of brands in the "Application" section directly on the page of each foam brand, or ask for advice from our managers.
What parameters of expanded polystyrene should be considered when choosing an insulating material?
When choosing foam (EPS), you should pay attention to such a parameter as the coefficient of thermal conductivity λ (lambda), the value of which is in the range from 0.047 to 0.031 W/mK. The lower the value of the coefficient λ, the better the thermal insulation properties of polystyrene. Other parameters of polystyrene are also important, such as: density, tensile strength, flexural strength or compressive strength. One of the main factors of Eurobud's openness and honesty is the placement of legible information about the product's parameters on each package. They are presented in the form of a table in which the main properties are indicated, such as the minimum density of the product in kg/m³, compressive strength (CS), bending strength (BS), tensile strength level (TR) and the declared coefficient of thermal conductivity indicated by the symbol λD. Also, you can always easily check the foam for quality yourself. The self-check procedure is very simple: weigh a pack of polystyrene, divide its weight by the volume of the package (the volume of a standard pack is 0.3 m³) and compare the result with the recommended density indicated on the package or in the table shown below.
Is the indicator of the stated density of expanded polystyrene plates important?
YES! Definitely important! Information about the density of polystyrene is not required by regulations and is not standard on the packaging. However, it is this indicator that determines the quality of the product. Eurobud places the density on the packages to guarantee its consumer that he is buying a quality, safe and durable expanded polystyrene. Additional labeling not only makes it easier to choose the right expanded polystyrene, but also gives everyone the opportunity to check whether the product meets the declared parameters.
Is the EPS burning?
Modern Styrofoam is a completely fireproof material! Styrofoam does have the ability to burn, but its self-burning time does not exceed 4 seconds, if there is no additional source of fire. Modern expanded polystyrene EPS contains flame-retardant additives, which ensure its self-extinguishing and fire resistance. The legend that styrofoam is fire-hazardous has its roots in Soviet times, when the quality and production technology of styrofoam differed significantly from modern standards. Today's Styrofoam is a high-quality, self-extinguishing material that does not spread flames. Styrofoam is classified by the group of flammability as a material of group G1 according to DSTU 8829:2019 and as a material of class E according to the class of reaction to fire according to DSTU EN 13501-1. ETICS systems with polystyrene EPS according to EN 13501-1 are classified as not lower than the reaction to fire class B-s1, d0, which confirms their high level of fire safety. We provide all test protocols that confirm the fire safety of TM Eurobud foam.
Is the EPS durable as insulation material?
YES! Eurobud on the basis of the State Research Institute of Building Structures has officially confirmed the term of effective operation of foam plastic without loss of primary properties for at least 50 years.
Is it true, that mice eat EPS?
No! Rodents do NOT eat Styrofoam. Styrofoam does not contain any nutrients for rodents. Accordingly, styrofoam plates are not food for mice. With the right choice of foam and high-quality insulation work, this issue will never bother you!
Is Styrofoam Harmful?
No, not harmful! Styrofoam does not emit toxic substances, so it is safe to use and does not harm your health. Moreover, foam plastic is an environmentally friendly product. The Eurobud company's products have undergone an independent expert assessment of compliance with the requirements of environmental standards at all stages of the life cycle: from raw materials to the finished product, and have been certified by the Ukrainian environmental mark "Green Crane".
Інші товари
bag
Granules polystyrene are made by the method of foaming polystyrene. The granule is a solid ball, from which further produce polystyrene boards. Eurobud produces granules in a fraction of 4-7 mm and packs in bags of 0.2 m³. Granules polystyrene are made exclusively from imported raw materials on high-tech equipment.

λD ≤ 0,046  CS (10) ≥ 15  ρ ≥ 7,5 кг

Додати до порівняння Додано
EPS 90

λD ≤ 0,037  CS (10) ≥ 90  BS ≥ 135  ρ ≥ 16 kg

Додати до порівняння Додано
eps 70

λD ≤ 0,039  CS (10) ≥ 70  BS ≥ 115  ρ ≥ 13,5 kg

Додати до порівняння Додано
Новинка

λD ≤ 0,032  CS (10) ≥ 60  BS ≥ 100  ρ ≥ 12,5 kg

Додати до порівняння Додано

λD ≤ 0,040  CS (10) ≥ 60  BS ≥ 100  ρ ≥ 12,5 kg

Додати до порівняння Додано

λD ≤ 0,045  CS (10) ≥ 30  BS ≥ 50  ρ ≥ 9kg

Додати до порівняння Додано
EPS 150

λD ≤ 0,034  CS (10) ≥ 150  BS ≥ 200  ρ ≥ 23,5 kg

Додати до порівняння Додано
EPS 120

λD ≤ 0,035  CS (10) ≥ 120  BS ≥ 170  ρ ≥ 20 kg

Додати до порівняння Додано
EPS 100

λD ≤ 0,036  CS (10) ≥ 100  BS ≥ 150  ρ ≥ 18 kg

Додати до порівняння Додано
калькулятор