Fiberglass mesh

Fiberglass mesh “Eurobud” is used as a reinforcing material in systems of external warming of houses, for restoration works, reinforcement of cracks in ceilings, walls, gluing of ceramic tiles, reinforcement of self-leveling floors, prevents cracking of surfaces at drying, shrinkage of temperatures, etc.

Fiberglass mesh is resistant to alkaline environment, which is very important, as most building solutions (plaster mixtures and putties) have a very aggressive alkaline environment, moisture resistant glass mesh, has a high breaking force, provides mechanical stability of the coating, increases the thermal resistance of external walls .

All technical parameters meet quality standards and are laboratory tested.

Fiberglass mesh “Eurobud”, meets the requirements of DSTU B B.2.7-56-96 (GOST 10499-95), p.5.1; DSTU GOST 19170-2003, p.4.7.2.

Features

Roll width: 1m +/- 5%.
Type of weaving: openwork.
Length of a roll: 50 m.
Eye: 5x5mm.
Weight: 110 g / m2, 135 g / m2, 160 g / m2.

Wholesale

Branded warehouses

Dealers

Other products

kutnyk alyuminiyevyj perforovanyj z sitkoyu

The corner aluminum perforated with a grid

Perforated aluminum angle with a grid of 2.5 m and 3.0 m, for leveling and reinforcing the corners of the house when insulating the facade with foam and framing the slopes of windows or doors

Profile plate for a heat-insulated floor

One of the most effective and modern methods of heating in private homes and apartments have become underfloor heating systems. Increasingly, they are used not only as additional heating, but also as the main heating system.

Parget ШФ-1 Polimin

The mix is used for high-quality decorative finishing of walls and facades of buildings when performing both internal and external works.

Krautherm adhesive mortar 90 EPS

Dry mineral mixture Krautherm Klebemörtel 90 EPS for preparation of the solution intended for gluing of insulating plates from expanded polystyrene in heat-insulating systems.

Krautherm 95 UNI

Fiber-reinforced dry mineral mixture, which is used for gluing insulation materials and installation of reinforced glass mesh waterproof plaster coating in thermal insulation systems.

klejova sumish p 20 teplo fasad arm polimin

Glue mix P-20 HEAT-FACADE APM Polimin

The adhesive mixture P-20 HEAT-FACADE of the workstation is intended for gluing of plates of a heater (expanded polystyrene and mineral wool) at external warming of buildings and constructions on the Polimin Heat-facade system, and also installation of a reinforcing waterproofing layer at height to 10 th floor inclusive), 3 days after gluing.

Glue mix P-19 HEAT-FACADE Polimin

It is intended for gluing of plates of a heater (expanded polystyrene and mineral wool) at external warming of buildings and constructions on the Polimin Heat-facade system.

Dowel

The dowel Eurobud with a plastic nail for fastening of light heat-insulating materials on the basis of expanded polystyrene and expanded polyurethane to a basis from concrete, a brick or a stone, in systems of warming by a method "easy-wet" and in systems of hinged ventilated facades.

Aluminum socle lath

The socle lath (profile) - the aluminum starting profile is intended for formation of zero level at gluing of a heater (styrofoam), various thickness, in plaster systems of warming.

VIEW ALL PRODUCTS