RAINWAY drainage systems, developed in Ukraine, effectively solve the problem of drainage of rain and melt water from roofs:
- private homes
- garages and gazebos
- multi-storey residential and office buildings
- industrial facilities
- other buildings
RAINWAY drainage system
Features:
Features:
Elements of the drainage system
RainWay drainage system is available in two sizes:
| System / parameter | Gutter cross section | Pipe diameter | Purpose |
| RAINWAY 130 | 130 mm | 100 mm | Houses with a roof area of more than 100 m², but not more than 5 floors |
| RAINWAY 90 | 90 mm | 75 mm | Small architectural forms – gazebos, roofs, garages, as well as houses with a roof area less than 100 m²Pipe diameter |
Other products
Wind upper bar - protects the roof from intense gusts of wind and prevents tearing of the sheets of roofing material.
The upper edge of the roof, used for corrugated roofs and prevents moisture from entering between the sheets of roofing material.
Snow barrier - a roof element that serves to prevent a sharp and sudden collapse of a large amount of snow from the roof. This roofing element is used for uniform and gradual ascent of snow and fastens on a professional flooring.
Small gutter - it is attached to the line of intersection of two slopes, which form the inner angle of inclination. It is used for aesthetic and reliable design of the joint of two slopes.
Sealing tapes are used under the ridge and at the joints of tent-shaped roofs when installing the roof.
If during installation the polymer layer of a covering of a metal tile or a professional flooring was damaged, then scratches are easy to paint over with a paint of the same color.
Over gutter lath- is attached to the cornice under the roofing material and serves to get condensate into the gutter.
Used for installation of roofing materials, covered with a special paint, which not only gives an aesthetic appearance, but also protects the head of the screw from corrosion.
Big gutter - it is attached to the line of intersection of two slopes, which form the inner angle of inclination. It is used for aesthetic and reliable design of the joint of two slopes.
