Eurobud EPS 30

Eurobud EPS 30

The expanded polystyrene plates Eurobud EPS 30 are made exclusively from import raw materials on the modern European equipment.

Standard sizes of expanded polystyrene plates: length 100 cm, width 50 cm, thickness from 1 cm to 60 cm, with a step of 1 cm.When ordering plates with a thickness of 11 cm to 60 cm, the number of packages must be a multiple of 8.

Under the individual order it is possible to make plates 100 cm, 200 cm and 400 cm long, 100 cm or 120 cm wide, and the volume of the whole order should be a multiple of 4.8 m³.

The side edge of EPS can be made flat and milled (allows you to lay the plates on the technology of “spike-groove”).

The density of Eurobud EPS 30 is 9 kg/m³*

*+- 5% depending on storage conditions.

icon adv
Effective use 50 years

Eurobud is the only one manufacturer of expanded polystyrene in Ukraine, which has confirmed the term of effective operation of polyfoam without loss of primary properties more than 50 years

Environmentally friendly and safe

Eurobud products are confirmed by the Ukrainian eco-label "Green Crane"

Flammability group G1

Self-extinguishing. Does not burn, does not spread flames

icon adv
Foreign raw materials

All Eurobud products are made exclusively from high-quality imported raw materials

Innovative equipment

We work only with new modern European equipment

icon adv
Own car fleet

We provide our own specialized transport for the delivery of wholesale orders

popular questions
Which EPS is the best to choose for insulation?
For correct and effective warming it is necessary to choose polyfoam of the corresponding mark and density, according to loadings and the project. For high-quality thermal insulation of facades, we strongly recommend the use of foam with a density of 12.5-18 kg / m3 (EPS 60 - EPS 100), 15-25 cm thick. For thermal insulation of floors on the ground, foundations, socles, flat and pitched roofs it is necessary to choose polyfoam with a density of 15-35 kg / m3 (EPS 80 - EPS 250), 15-35 cm thick. You can read more about the recommendations for the use of brands in the "Application" section directly on the page of each brand of foam.
What parameters of expanded polystyrene should be considered when choosing an insulating material?
The main differences between the types of polystyrene available on our market relate mainly to its most important indicator - the thermal conductivity λ (lambda), the value of which is in the range from 0.045 to 0.031 W / mK. The lower the value of the coefficient λ, the better the insulating properties of polystyrene. Also important are other parameters of polystyrene, such as: tensile strength, flexural strength or compressive strength. One of the main factors of Eurobud's openness and honesty is the placement on each package of readable information about the product parameters. They are presented in the form of a table showing the main properties, such as the minimum density of the product in kg / m³, compressive strength (CS), flexural strength (BS), tensile strength (TR) and the declared thermal conductivity indicated by the symbol λD.
Is the indicator of the stated density of expanded polystyrene plates important?
Yes! Definitely important! Information on the density of polystyrene is not required by regulations and is not standard on the package. However, this indicator determines the quality of the product. Eurobud places density on packaging to ensure that its consumer buys quality, safe and durable polystyrene. Additional labeling not only facilitates the choice of the right polystyrene foam, but also gives everyone the opportunity to check whether the product meets the stated parameters.
Is the EPS burning?
No! The structure of expanded polystyrene plates of TM Eurobud includes flame retardant which provides self-extinguishing of material after influence on it of open fire. All our products correspond to the flammability group G1 - self-extinguishing materials.
Is the EPS durable as insulation material?
YES! Eurobud on the basis of the State Research Institute of Building Structures has officially confirmed the term of effective operation of foam without loss of primary properties for at least 50 years.
Is it true, that mice eat EPS?
No! Mice do not eat insulation foam. The foam does not contain any nutrients for rodents. Accordingly, Styrofoam boards are not food for mice. With the right and competent choice of material and quality insulation work, this question will never bother you.
Is Styrofoam Harmful?
No, not harmful! Foam does not emit toxic substances, so it is safe to use and does not harm your health. Moreover, polyfoam is an environmentally friendly product. Eurobud products have passed an independent expert assessment of compliance with environmental standards at all stages of the life cycle: from raw materials to finished goods, and confirmed by the Ukrainian eco-label "Green Crane"
Other products

λD ≤ 0,0455  CS (10) ≥ 20  BS ≥ 40  ρ ≥ 8 кг

Додати до порівняння ADDED
EPS 90

λD ≤ 0,037  CS (10) ≥ 90  BS ≥ 135  ρ ≥ 16 kg

Додати до порівняння ADDED
eps 70

λD ≤ 0,039  CS (10) ≥ 70  BS ≥ 115  ρ ≥ 13,5 kg

Додати до порівняння ADDED

λD ≤ 0,040  CS (10) ≥ 60  BS ≥ 100  ρ ≥ 12,5 kg

Додати до порівняння ADDED
eps 40

λD ≤ 0,044  CS (10) ≥ 40  BS ≥ 60  ρ ≥ 10kg

Додати до порівняння ADDED
EPS 250

λD ≤ 0,032  CS (10) ≥ 250  BS ≥ 350  ρ ≥ 35 kg

Додати до порівняння ADDED
eps 200

λD ≤ 0,033  CS (10) ≥ 200  BS ≥ 250  ρ ≥ 28 kg

Додати до порівняння ADDED
EPS 150

λD ≤ 0,034  CS (10) ≥ 150  BS ≥ 200  ρ ≥ 23,5 kg

Додати до порівняння ADDED
EPS 120

λD ≤ 0,035  CS (10) ≥ 120  BS ≥ 170  ρ ≥ 20 kg

Додати до порівняння ADDED
EPS 100

λD ≤ 0,036  CS (10) ≥ 100  BS ≥ 150  ρ ≥ 18 kg

Додати до порівняння ADDED